Cycle
X
6246
US
Hwy 51 South
Hazelhurst,
WI 54531
USA
Phone: 715-356-7346
Email: hotrodcyclex@gmail.com
CycleX
ultimate piston and cylinder combo
|
|
Featured Product #2:
First ... we would like to thank and
congratulate the manufacturer
of the indestructible material used in our
tensioners.
The problem: Racers have experienced many catastrophic problems with the stock chains, tensioners and design. Stock owners of Honda cb750 models with some miles are annoyed by the rattling noise at idle. Basic observations: Used stock primary chains and used stock tensioners have under 1 pound of spring tension ..... allowing the chains to have no real control at any RPM. During harder deceleration the tensioner is fully loaded and the spring pressure averages approx. 2 pounds with the top of the chain whipping violently. New tensioners: PA-46 material (amazing stuff) Full support with a floating design to compensate for all scenarios. 12% stronger springs to add the proper tensions in the natural position (approx. 3.5 lbs.) and fully loaded (approx. 7.9 lbs.) Wider than stock tensioners for full width chain support. Note: We also are offering a slightly stronger spring for you road racing folks.
Full support
for chain links, proven bullet proof PA-46
material, bolts right in with no modifications
needed. race proven. CHECK OUT OUR CAM & PRIMARY TENSIONERS PAGE
|
|
Featured Product #3:
|
Featured Product #4:
gb |
Featured Product #5:
|
CLICK HERE TO GO TO OUR HARLEY PAGE
|
Featured Product #6: |
Featured Product #7:
Early style Honda cb750 sohc camshaft
oilers (new) There are many nicely
ported early Honda cb750 cylinder heads still around from
the olden days. Unfortunately, most of
the camshaft oilers are stuck in the heads and sometimes
need to be drilled when the old tricks-of-the-trades do not
work to remove them. Not exactly breaking
news .... but, introducing our alloy early cam oilers and
"O" ring combos. .040 oiling hole.
|
Featured Product #8:
We were able to finish a few rear
wheels that are for sale. Drum brake "K
models" thru 1978. Powder coated
silver hubs. 3 inches by
16-inch chrome rims (new) New 16-inch
chrome rear spokes. Speaking of
chrome rear spokes ..... Buchanan's spoke and rim are currently
asking over $300.00 for the spokes only. $425.00 each
|
Featured Product #9:
|
Featured Product #7:
|
OUR PAGES:
|
Cam & Primary Chains
|
|
|
|
Valve Train |
|
|
|
|
||
|
|
|
|
Polished, Chrome & Powder Coated Engine Covers
|
|
|
|
|
Git Kit |
|
|
|
|
|
|
|
|||
|
|
|
3.99% customer service charge is applied to all phone orders.
If ordering via phone, please also provide the part # of any products you are interested in for faster and more accurate service.
If you encounter a (rare) broken button as you're trying to add parts to your cart (going to PayPal summary instead of your cart or not opening PayPal at all) or anything else of concern, please call us to report it. We'll try to have it fixed for your convenience within the next 5-10 minutes. Afterwards, refresh the page and try again.
It
is the sole and exclusive responsibility of the purchaser to determine the
suitability of any part, product or work for his or her use.
The purchaser shall
assume all legal, personal injury risk and liability and all other obligations,
duties and risks therewith.
There is no warranty on High Performance motors.
Cycle X Global Headquarters
6246 US Hwy 51 South
Hazelhurst, WI 54531
Phone: 715-356-7346
Email: hotrodcyclex@gmail.com
<>